- Dual trigger design, use a dedicated two-way driver IC.
- Strong resist interference, use diode continued current to protect it.
- The relay contact part adopts double cloth line for large current, safe and reliable.
- The input and output are 5.08mm wiring terminals, wiring is more convenient, suitable for PLC control.
- Input terminals can be arbitrarily set high and low level, the control mode is more flexible.
- Equipped with fixing screw hole, easy to install.
- Each way module can be set high or low triggered by jumper.
- Size: 13.2 x 5.4 x 1.9cm
- Material: Metal
- Mounting bolts holes: 4
- Holes diameter: 3mm
- Voltage: 24V
- Maximum load : AC 250V/10A, DC 30V/10A
- VCC: Power end
- GND: Ground strap
- CTR1-CTR8: Signal input trigger
- 24 line interface, the interface can be directly connected to all leads , user-friendly.
- NO1-NO8: normally open relay interfaces , relay before the vacant after the pull shorted with COM
- COM1-COM8: Relay Common Interface
- NC1-NC8: normally closed relay interface relay shorted with COM ago , after the pull- vacant
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.